Care preferences

  • Open the Care preferences page
  • Care actions
  • Growth
  • Intelligence

The Care preferences page controls the care buttons on the plant pages, the growth of your sanctuary and the intelligence functions of the app.

NOTE On a computer, click where this page tells you to tap.

Open the Care preferences page

  1. Tap your picture to open Guardian.
  2. Tap Care preferences.

Care actions

The Care actions group, with the care buttons of a plant page and a switch under each button.
  1. Care buttons and their switches — Shows the care buttons of a plant page on a day when no care is due. A solid button always shows. A button with a dashed line stays locked and shows the days until the care is due.
  2. Only when due, under Hydrate — When this switch is on, the Hydrate button stays locked until water is due. When it is off, the button always shows.
  3. Only when due, under Nourish — When this switch is on, the Nourish button stays locked until fertilizer is due. When it is off, the button always shows.
  4. Only when due, under Photo — When this switch is on, the Photo button stays locked until a progress photo is due. When it is off, the button always shows.
  5. Only when due, under Rotate — When this switch is on, the app locks the Rotate button until the next quarter turn is due. When it is off, the button always shows.
  6. Only when due, under Mist — When this switch is on, the app locks the Mist button until the next spray is due. When it is off, the button always shows.

The Rotate and Mist buttons show only on plants that need them. Rotate shows on an indoor plant that gets its light from one window. Mist shows on a plant that needs humid air, when the air near it is drier than that. The switches under these two buttons operate in the same way as the other switches.

The Rotate and Mist buttons and their switches show here only when you set Rotate reminders or Mist reminders to on, in Intelligence.

When you change a switch, the button above it changes immediately. These switches need a paid plan. On a free plan, they show Premium.

Always show the Hydrate button

  1. On the Care preferences page, find the Hydrate button. Under it, set Only when due to off.
  2. Make sure that the Hydrate button is now solid.

Growth

The Growth control, with its three settings and the effect on your plants.
  1. Growth — Sets the fertilizer, the photo checks and the watering for all your plants. Tap Promote, Maintain or Slow. The text under the control tells you the result.
  2. Days between, on your plants — Shows the days between two waterings, two fertilizer tasks and two photo checks for each plant. An arrow shows the change from Maintain to your selection.
  • Promote: the plants get fertilizer more frequently and photo checks sooner. The app also asks for water a little earlier as the soil becomes dry. A species that must become dry between waterings keeps its watering schedule.
  • Maintain: each species keeps its own schedule.
  • Slow: the plants get fertilizer less frequently and photo checks later. The watering does not change, because drier soil can cause damage to the plant.

The app always stays inside the limits of each species. A plant that needs attention keeps its usual schedule. With Promote, a plant that rests in the cold season also keeps its usual schedule.

You made this selection when you started to use the app. You can change it at any time.

Intelligence

The Intelligence group, with the weather, Rotate, Mist, season, propagation and pets switches.
  1. Weather intelligence — Uses the local weather to adjust the care of your plants. This function needs a paid plan.
  2. Rotate reminders — Turns the Rotate button on or off. This switch is off until you set it to on. When it is off, the app does not show Rotate on the plant pages, in the Care list or in the counts.
  3. Mist reminders — Turns the Mist button on or off. This switch is off until you set it to on. When it is off, the app does not show Mist on the plant pages, in the Care list or in the counts.
  4. Seasonal care adjustments — When a plant starts its rest season, the app gives it less water and no fertilizer.
  5. Cultivation intelligence — Gives advice about cuttings, division and new growth. This function needs a paid plan.
  6. Pets in residence — Shows a pet-safety filter for plants that are poisonous to pets.

Rotate reminders and Mist reminders are off at the start, because they give many tasks. Rotate is a quarter turn every week. Mist is a spray every 2 days. Set a switch to on if you want these reminders. Then the button works as the Care actions switch under it tells it to.

Start Rotate reminders

  1. On the Care preferences page, in Intelligence, set Rotate reminders to on.
  2. In Care actions, the Rotate button and its Only when due switch show.

Two more switches show only when they can operate:

  • Auto-water on rain shows when you have an outdoor zone. When rain makes the soil of an outdoor plant wet, the app records a watering. This switch needs Weather intelligence.
  • Auto-log watering from sensor shows when a soil-moisture sensor is on a plant. When the moisture increases quickly, the app records a watering.
  • Botanical Legacy
  • The Doctor
  • How it works
  • Membership
  • Blog

An instrument for the private grower. Quiet, precise, reverent of the specimen.

  • Botanical Legacy on Bluesky
  • Botanical Legacy on X
  • Botanical Legacy on Instagram
  • Botanical Legacy on Pinterest
  • Botanical Legacy on Threads
  • Botanical Legacy on YouTube
  • Botanical Legacy on TikTok

Platform

  • Sanctuary
  • Download
  • Sensors
  • Pricing
  • About

Field notes

  • Blog
  • Species guides
  • Methodology

Conservancy

  • Help & support
  • Terms
  • Privacy
  • Cookies
  • Acceptable use
  • Delete account

© Botanical Legacy. All specimens remain yours.