Sensors settings

  • Open the Sensors settings
  • Connect Home Assistant
  • Connect an Ecowitt gateway
  • Connect a sensor to a room or a plant
  • Disconnect Home Assistant
  • Soil checks are not sensors

You can connect sensors in these ways:

  • Through Home Assistant. Home Assistant is a home automation system that you install yourself. It can read many types of sensor.
  • Through an Ecowitt gateway. The app reads the Ecowitt WH51 soil probes from your account on ecowitt.net. You do not need Home Assistant for this.

When you connect one of them, the app finds your sensors. Then you connect each sensor to a room or to a plant.

Sensors are available on the Cultivator plan. On a different plan, this page shows Live sensor telemetry is a premium feature and does not show the form.

NOTE On a computer, click where this page tells you to tap.

Open the Sensors settings

  1. Tap your picture to open Guardian.
  2. Tap Sensors.

Connect Home Assistant

The Sensors settings, with the form that connects Home Assistant.
  1. Connect Home Assistant — Shows the connection to Home Assistant. After you connect it, this row shows Home Assistant connected and a Re-scan button.
  2. Home Assistant URL — Type the address of your Home Assistant, for example https://your-home-assistant:8123. The address must be on the internet, not only on your home network.
  3. Long-lived access token — Type a long-lived access token from your Home Assistant profile. The app keeps the token secret.
  4. Connect — Connects to Home Assistant and finds your sensors. The button is pale until both fields have a value.

Connect Home Assistant

  1. In Home Assistant, open your profile and make a long-lived access token. Copy it.
  2. In the app, open the Sensors settings.
  3. Type the address of your Home Assistant.
  4. Paste the token.
  5. Tap Connect.

If the app cannot connect, a message tells you why. For example, the app cannot get to an address that works only on your home network.

Connect an Ecowitt gateway

Use this if you have an Ecowitt GW1200 or GW2000 gateway with WH51 soil probes. You do not need Home Assistant.

Connect an Ecowitt gateway

  1. On ecowitt.net, open Private Center. Copy the Application Key and the API Key.
  2. In the Ecowitt app, find the MAC address of your gateway.
  3. In the app, open the Sensors settings. Go to Connect an Ecowitt gateway.
  4. Paste the keys into Application Key and API Key.
  5. Type the address into Gateway MAC address, for example AA:BB:CC:DD:EE:FF.
  6. Tap Connect.

When the gateway is connected, the row shows Ecowitt connected. Its soil probes show under Discovered devices. If you pair a new probe with the gateway, tap Re-scan. To enter new keys, tap Update keys.

If the app cannot connect, a message tells you why. For example, the keys are not correct, or the gateway is not on that Ecowitt account.

The app reads only the soil moisture of a WH51. It gets new values from ecowitt.net at least one time each hour.

To disconnect, tap Disconnect Ecowitt, then tap Disconnect to confirm. New values stop for your Ecowitt probes. The values that the app received before stay on your plants.

Connect a sensor to a room or a plant

After you connect Home Assistant or an Ecowitt gateway, the page shows two groups:

  • Connected sensors: the sensors that you connected before. Each row shows what the sensor measures, its name and where it is, for example Room · Living room or Plant · Calathea.
  • Discovered devices: the new sensors that Home Assistant or the Ecowitt gateway found. When you already have sensors, this group shows one row, for example 2 new to assign. Tap the row to open it.

Each sensor can go only to a correct place:

  • Air humidity goes to a room. All the plants in that room use it.
  • Soil moisture, light and nutrients go to one plant.
  • Air temperature goes to a room or to a plant.

Connect a new sensor

  1. Under Discovered devices, find the sensor.
  2. Tap Assign to… and select a room or a plant.
  3. Do steps 1 and 2 for each sensor that you want to connect.
  4. Tap Bind selected. The button shows how many sensors you selected.

A warning under a sensor tells you if the app cannot record its values. For example, the unit of the sensor is not one that the app knows. Change the unit in Home Assistant, then tap Re-scan.

When you add sensors in Home Assistant, tap Re-scan to find them. To use a new token, tap Reconnect.

Disconnect Home Assistant

  1. At the bottom of Connected sensors, tap Disconnect HA.
  2. Tap Disconnect to confirm, or tap Cancel.

New values stop for all your sensors. The values that the app received before stay on your plants. You can connect again at any time.

Soil checks are not sensors

When you push a finger into the soil and record Check the soil on a plant, the app keeps that value like a sensor value. The plant uses it to calculate its watering. But a soil check is not a device. This page does not show it, and the count of sensors in Guardian does not include it.

You see your soil checks on the plant page. The Sensors page in Care shows their number, for example 1 hand-entered soil check.

To see the values of your sensors, open the Sensors page in Care.

  • Botanical Legacy
  • The Doctor
  • How it works
  • Membership
  • Blog

An instrument for the private grower. Quiet, precise, reverent of the specimen.

  • Botanical Legacy on Bluesky
  • Botanical Legacy on X
  • Botanical Legacy on Instagram
  • Botanical Legacy on Pinterest
  • Botanical Legacy on Threads
  • Botanical Legacy on YouTube
  • Botanical Legacy on TikTok

Platform

  • Sanctuary
  • Download
  • Sensors
  • Pricing
  • About

Field notes

  • Blog
  • Species guides
  • Methodology

Conservancy

  • Help & support
  • Terms
  • Privacy
  • Cookies
  • Acceptable use
  • Delete account

© Botanical Legacy. All specimens remain yours.